Interior Radiator Finish

Interior Radiator Finish

Flügger Interior is water-based enamels for finishing wood and metal indoors. The products are easy to use, and produce an attractive and enamel-like surface.

Product Description

Heat-resistant acrylic enamel with a smooth, supple consistency and good coalescence. Recommended for radiators and heating pipes; withstands temperatures up to 80 °C.
  • Good coalescence
  • Hard surface
  • Endures constant exposure to heat

Usage

Iron and metal with anti-corrosion protection

Substrate

Must be primed, clean, dry, solid and suitable for paint treatment.

Treatment

Remove loose material and paint by cleaning and sanding.
Remove dirt, filth, grease and chalking material with Fluren 37.
Prime bare iron and metal with Metal Pro Multiprimer.
Hard, smooth substrates must be sanded matt and primed if needed with Fix Primer.
Paint only on cold surfaces; on hot surfaces the paint does not flow optimally.
Apply 1-2 coats. Some colours require additional treatments.

Application

Brush, roller or spray
Choose appropriate tools for the desired finish
Apply wet-on-wet, and finish by brushing/rolling in the same direction
Always use the same batch number for continuous/unbroken surfaces
Differences in surface texture may result in shade deviations
Cold or heat can affect the material’s viscosity
Material temperature when spraying must be min. 12 °C.
Condensation must not form during drying/curing
Cold weather and high atmospheric humidity extend the drying time, complete curing and re-coat interval
High temperature and low atmospheric humidity reduce the drying time and complete curing
Always apply test treatments to check and accept the adhesion and results

Environmental information

Clean off the paint from tools and wash them with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.

Storage: Cool, frost-free and tightly closed

Protection equipment: Spray painting: painting suit, full face mask with combined filter. Painting: eye protection, gloves. Sanding: respiratory protection

Technical Data

Producttype
Acrylic enamel
Gloss
40,Semi Gloss
Density (kg/liter)
1.26
Weight %
48
Volume %
33
Nominal spreading rate (m2/l)
10
Humidity
Max. humidity 80 % RH.
Dry to touch at 20°C, 60% RF (Hours)
1
Fully cured at 20c, 60% RF (Days)
28
Washability
Class 1
Dilution
Water. Dilute with up to 10% water when spraying.
Cleaning of Tools etc.
Water
Supplementary Info
Registered in the Nordic Ecolabelling Building Products Database for products which can be used in buildings with the Swan label.

Current TDS Version

október 2020


Replaces TDS Version

janúar 2018