DETALE Topcoat

DETALE Topcoat

DETALE CPH is a line of exclusive decorative products to take care of the small details. Paints and finishes are inspired by our Nordic design heritage and the changeability of nature. The products are suitable for professional as well as do-it-yourself use.

Product Description

Features-enhancing impregnation for walls and ceilings. Produces a water and dirt repelling surface. Recommended for premises with normal functional requirements, that are exposed to some dirt and wear and tear.
  • Impregnating
  • Transparent
  • Dirt resistance corresponding to a matt painted surface


Living rooms, entrances, offices, business premises, clinics, shops, hotels and restaurants.
Surface treated with DETALE KC 14 and DETALE KABRIC as well as a mineral substrate of plaster, concrete and brick.


Must be absorbent, clean, dry, firm and suitable for surface treatment.


Remove dust and loose material.
Apply 1-2 times. Maximum effect is achieved after 2 applications.


Microfibre cloth, dabbed on the surface.
Apply if needed using a low pressure sprayer and subsequent dipping.
Apply evenly wet-on-wet, avoiding runners.
Avoid condensation formation.
Cold and increased humidity extends drying time, full curing and recoating interval.
Increased temperature and low atmospheric humidity reduce drying time and full curing.
Always test for control and acceptance of adhesion and result.


Transparent surface.
Withstands cleaning with a mild cleaning agent without abrasive material, water and drying with a moist cloth.
Avoid placing loads on the surface before the treatment is fully cured.

Environmental information

Clean off the paint from tools and wash them with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.

Storage: Cool, frost free and tightly closed

Protection equipment: Painting: eye protection, gloves. Sanding: respiratory protection.

Technical Data

Density (kg/liter)
Weight %
Volume %
Workable temperature
Min. +10°C
Max. humidity 80 % RH.
Dry to touch at 20°C, 60% RF (Hours)
Fully cured at 20c, 60% RF (Days)
Cleaning of Tools etc.

Current TDS Version

júlí 2021

Replaces TDS Version

febrúar 2021